Block Making Machines for Bahrain

Block Making Machine Bahrain: Fitting Output Into a Compact Site

Bahrain enquiries often come from plants working on limited land, where yard space and material handling matter as much as the press itself. That pushes the choice toward machines that produce a solid daily output from a small footprint, and toward systems that reduce or remove pallets so the yard holds more finished product. Three inputs settle the setup.

• The products you sell: hollow block, solid brick, paver or kerb stone, each with its own mould and cycle.
• The output needed per shift from a compact site.
• Yard size, curing space and electrical supply.

A pallet-free system stacks the wet block online as it leaves the machine, which frees the yard and removes pallet handling for standard solid bricks and small hollow blocks. Where the site is tight, that is often the deciding factor.

Recommended Machines for a Bahrain Plant

These are the builds most Bahrain buyers review, from a compact automatic machine to a pallet-free system. Each links to the full product page.

• QST8-15 / QST6-15 fully automatic block making machine: a compact footprint machine, 95 kN and 68 kN vibration force and 14 t / 12 t machine weight, reaching up to 90,000 standard bricks per 8-hour shift on the QST8-15. A fit for a small and tight yard.
• QST1200 / QST1000: a mid-size automatic machine, 150 kN vibration force and up to 120,960 standard bricks per shift on the QST1200, for a plant that sells more each day.
• QSMT500 / QSMT1000 pallet-free system: an integrated brick-making and cuber build that stacks the wet block online, removing pallets from the process. The QSMT1000 reaches up to 135,000 bricks (240 x 115 x 50 mm) per 8-hour shift and keeps the yard free of pallets.
• QS-1000Y mobile cuber: a crawler-mounted cuber that works in the curing yard under remote control, stacking up to 20 layers of solid brick on the spot. It handles different specifications from different machine models.

Where yard space is the limit, the complete block factory solution shows how pallet-free handling and cuber options reshape the site layout.

What Affects the Price of a Block Making Machine in Bahrain

Cost follows the configuration, and on a compact site the handling choice matters more than usual. The factors that move the number:

The block making machine price guide explains how to compare quotations that cover different scope, and why the configuration sheet decides the comparison.

Blocks and Capacity for a Bahrain Plant

Capacity is quoted per product and per shift. At reference, the QST8-15 reaches up to 90,000 standard bricks (240 x 115 x 51 mm) in an 8-hour shift at a 15 to 23 second cycle, the QST1200 up to 120,960, and the pallet-free QSMT1000 up to 135,000 bricks (240 x 115 x 50 mm) per 8-hour shift at a 13 to 18 second moulding cycle. On a pallet-free build the wet block is stacked online, so the finished product leaves the machine already cubed.

Bahrain demand commonly pairs hollow block for building with pavers and kerb stones for yards and roads, so a machine that runs both from one platform covers the usual orders without a large mould inventory.

• Hollow block 390 x 190 x 190 mm for walling.
• Standard brick 240 x 115 x 51 mm for solid work.
• Holland brick 200 x 100 x 60 mm and small block 170 x 80 x 80 mm for paving and detailing.

Power Supply and Installed Capacity

Confirm your site supply, phase, voltage and frequency, at quotation. A standard build ships for 380 V three-phase, then the electrical configuration is matched to the supply you confirm. On the pallet-free system the total power is about 39.5 kW on the QSMT500 and about 57.5 kW on the QSMT1000, while the automatic machines run about 44.9 kW on the QST8-15 and 57.6 kW on the QST1200, before batching, mixing and curing equipment. Size the transformer against the total load of the line, not only the press.

Raw Materials and Mix Design

The machines form blocks from cement, sand, gravel and crushed stone powder, and accept construction waste, slag, fly ash or gangue where available. Bahrain plants work with local sand and crushed aggregate, with cement content and gradation set by trial mixes per product. On a pallet-free build the mix feeds the machine directly, so a steady, consistent mix and a batching machine that doses aggregate by preset ratio with three-point induction sensors keep the online stacking reliable.

Shipping and Delivery to Bahrain

Machines load at the Chinese port and ship to your destination port. The main units run from about 8 t on the pallet-free system to 34 t on the largest automatic machine, with the dimensions listed on each product page, so the loading plan, container or break-bulk arrangement and lifting points are set per order. Port of discharge, documentation and delivery terms are confirmed against your order before shipping, and the packing list matches the configuration sheet so nothing is separated in transit. Share your nearest port at quotation stage so the loading plan suits the route.

Installation, Training and Spare Parts

Installation follows the foundation drawing supplied with the machine, and commissioning includes a run with your own mix. Operators are trained on the PLC touch screen, mould change, cycle adjustment and daily checks, with a shift checklist. On a compact site, planning the material flow and the cuber position reduces handling, so the training covers the yard layout as well as the machine. Keep a planned spare parts set on site, wear parts, hydraulic spares and the consumables that stop a line when they run out.

How to Request a Bahrain Quotation

Send four things and the quotation will be built around your site.

1. Block sizes and the type of each product.
2. Target output per shift and the shifts you plan to run.
3. Yard size, curing space and power supply.
4. Whether you want a conventional line or pallet-free handling.

Use the request for quotation form to send them. You will receive a configuration sheet with the machine, moulds, curing and batching equipment and the spare parts package for your plant.

Request your Bahrain quote and the configuration and cost factors for your project come back in the same document.